Filter
Top Products
YORK INTERNATIONAL8
SECTION 1 – PRODUCT DESCRIPTION
The YORK OptiView Remote Control Center is a
microprocessor based control system capable of
remotely monitoring certain chillers and condensing
units. It can monitor and individually control 1 to 8 of
these chiller/condensing units.
The panel comes congured with a full screen color
LCD Graphic Display mounted in the middle of a
keypad interface. The graphic display allows the
presentation of the current information all at once. In
addition, the operator may view a graphical representa-
tion of several operating parameters. For the novice
user, the locations of various parameters are clearly and
intuitively marked. Instructions for specic operations
are provided on many of the screens.
The graphic display also allows information to be
represented in Imperial units (temperatures in °F and
pressures in PSIG or PSID) or SI units (temperatures in
°C and pressures in BARG or BARD).
All values that are modiable at the Remote Control
Center are recorded in memory and preserved even
through a power failure condition. During operation, the
chillers are continually polled and the user is advised of
the operating conditions by various status and warning
messages. A complete listing of shutdown, status, and
warning messages is within the chiller/condensing
unit’s operation manual.
If the chiller/condensing unit is in remote control mode
the OptiView Remote Control Center provides the
capability to program the following:
1. Start Command
2. Stop Command
3. Local Setpoint
4. Local Control Range
5. Daily/Holiday Schedule
6. Current or Load Limit Setpoint
The Remote Control Center is also designed to enable
the user to obtain chiller/condensing unit printouts
directly from this panel.
This equipment has been tested and
found to comply with the limits for
a Class A digital device, pursuant
to part 15 of the FCC Rules. These
limits are designed to provide reason-
able protection against harmful
interference when the equipment is
operated in a commercial environ-
ment. This equipment generates,
uses, and can radiate radio frequency
energy and, if not installed and
used in accordance with the instruc-
tion manual, may cause harmful
interference to radio communica-
tions. Operation of this equipment in
a residential area is likely to cause
harmful interference in which case
the user will be required to correct
the interference at his own expense.
Product Description