Filter
Top Products
YORK INTERNATIONAL52
COMMS SCREEN
OVERVIEW
This screen is accessed from the RCC Setup Screen.
This screen allows denition of the necessary com-
munications parameters. Refer to PRINTER Section
of this book for details of the Printer connections
and setup.
DISPLAY ONLY
RS-485 Baud Rate 4800
Shows the baud rate at which the panel shall com-
municate through the Com3 port to the remote control
panel(s). The baud rate of the remote control panel(s)
must be set for 4800 in the EPROM. Make sure the
correct EPROM is installed at the chiller/condenser
control panel(s). See Table 1.
PROGRAMMABLE
RCC Poll Time (5-30 sec.)
Dene the poll time (how frequently) this panel requests
for data from another panel through the Com3 port.
NAVIGATION
Home
Causes an instant return to the Home Screen.
Setup
Return to the Setup Screen.
FIG. 22
00522VIPC
Operation