Filter
Top Products
FORM 50.40-OM2
53YORK INTERNATIONAL
PRINTER SCREEN
OVERVIEW
This screen is accessed from the RCC Setup Screen.
This screen allows denition of the necessary com-
munications parameters for the printer. Refer to
PRINTER section of this book for details of the Printer
connections and setup.
DISPLAY ONLY
None.
PROGRAMMABLE
Automatic Printer Logging (Enabled / Disabled)
Enable the printer to begin printing status reports
beginning at the programmed start time and recurring
at the interval dened above.
Log Start Time
Set the time at which scheduled logs will begin.
Log Output Interval
Dene the interval at which logging will occur. We
suggest you select a reasonable amount of time so that
it is not occurring too much.
Log Unit Selected
Select a unit or all units to logs of.
Printer Type
Dene the printer type connected to the OptiView RCC.
Printer Baud Rate
Dene the baud rate at which the panel shall com-
municate to the printer.
Printer Data Bit(s)
Dene the number of data bits with which the panel
shall communicate to the printer.
Printer Parity Bit(s)
Dene the number of parity bits with which the panel
shall communicate to the printer.
Printer Stop Bit(s)
Dene the number of stop bits with which the panel
shall communicate to the printer.
Cancel Print
Terminates the printing in process. This key is only
visible while printing is in process.
NAVIGATION
Home
Causes an instant return to the Home Screen.
Setup
Return to the Setup Screen.
FIG. 23
00523VIPC
3