Filter
Top Products
FORM 50.40-OM2
23YORK INTERNATIONAL
is displayed, the unit’s button will be enabled
allowing it to be selected.
• Running / Faulted will be displayed when at least
one system on the unit is running and at least one
system is faulted. While this message is displayed,
the unit’s button will be enabled allowing it to
be selected.
• Cannot Run will be displayed for any non-fault
condition preventing the entire chiller from run-
ning. This would include such things as the daily
schedule, unit switch, all system switches, run
perm, etc. While this message is displayed, the
unit’s button will be enabled allowing it to be
selected.
Unit Run Indicator (LED)
Is ON when the unit is running.
Average Ambient Temperature
Displays the average Ambient Air Temperature of all
the units connected.
PROGRAMMABLE
None
NAVIGATION
Unit #
A detailed view of data relevant to the specied (#) unit.
If the “Not Initialized” status message is displayed,
the unit’s button will be disabled, not allowing it to
be selected.
Setpoints
This screen provides the gateway to many of the
OptiView Remote Control Center’s general setup
parameters such as Date/Time, Comm Setup, Printer
Setup, etc.
3