Filter
Top Products
Chapter 6: Devices, Device Groups, and Ports
57
Column
number
Tag or value Details
Use "OUTLET" for configuring outlets
on a PX device.
5 Port or Outlet Number Required field.
6 Port or Outlet Name Optional. If left blank, a default name
or the name already assigned at the
device level will be used.
7 Node Name For KVM and Serial ports, enter a
name for the node that is created
when this port is configured.
To add a blade to the CSV file:
Column
number
Tag or value Details
1
ADD
The first column for all tags is the
command ADD.
2
DEVICE-BLADE
Enter the tag as shown.
Tags are not case sensitive.
3 Device Name Required field.
4 Port Number Required field.
5 Blade Number Required field.
6 Blade Name Optional. If left blank, the name
assigned at the device level is used.
If a name is entered in the CSV file, it
will be copied to the device level.
7 Node Name Enter a name for the node that will
be created when this blade is
configured.
To assign a category and element to a device to the CSV file:
Categories and elements must already be created in CC-SG.
You can assign multiple elements of the same category to a device in the
CSV file.
Column
number
Tag or value Details
1
ADD
The first column for all tags is the
command ADD.