Filter
Top Products
Chapter 6: Devices, Device Groups, and Ports
34
Adding a Device
Devices must be added to CC-SG before you can configure ports or add
interfaces that provide access to the nodes connected to ports. The Add
Device screen is used to add devices whose properties you know and
can provide to CC-SG. To search for devices to add, use the Discover
Devices option. See Discovering Devices (on page 33).
To add
Raritan PowerStrip Devices that are connected to other Raritan
devices to CC-SG, see Managed Powerstrips (on page 69).
To add a device to CC-SG:
1. Choose Devices > Device Manager > Add Device.
2. Click the Device Type drop-down arrow and then select the type of
device you are adding from the list. Depending on the device type
you select, you will see a slightly different Add Device page.
• For instructions on adding KVM or serial devices, see Add a KVM or
Serial Device (on page 34).
• For in
structions on adding Powerstrip devices, see Add a
PowerStrip Device (on page 36).
• For in
structions on adding Dominion PX devices, see Add a
Dominion PX Device (on page 36).
Add a KVM or Serial Device
KVM and serial devices may support 256-bit AES encryption, which CC-
SG also supports as of release 4.1. If the device is set to the default
encryption mode "auto-negotiate", the device will negotiate with CC-SG
to select an appropriate encryption level to function with CC-SG.
1. Type a name for the device in the Device name field. See Naming
Conventions (on page 353) for details on CC-SG's rules for name
length
s.
2. Type the IP Address or Hostname of the device in the Device IP or
Hostname field. See Terminology/Acronyms (on page 2) for
hostn
ame rules.
3. Type the number of the TCP communication port used to
communicate with the device in the TCP Port Number field. The
maximum is five numeric characters, from 1 to 65535. The default
port number for most Raritan devices is 5000.
4. Type the name used to log into this device in the Username field.
The user must have administrative access.
5. Type the password needed to access this device in the Password
field. The user must have administrative access.