Filter
Top Products
Chapter 8: Nodes, Node Groups, and Interfaces
114
Column
number
Tag or value Details
3 Node Name Enter the same value as entered for
Raritan Port Name.
4 Raritan Device Name Required field.
The device must already be added to
CC-SG.
5 Port Number Required field.
6 Blade Slot If the node is associated with a
blade, enter the slot number.
7 Raritan Port Name If left blank, CC-SG will use the
existing port name from the device. If
you enter a new name, the name will
be copied to the device, with the
exception of SX devices.
8 Interface Name Enter the same value as entered for
Raritan Port Name.
9 Description Optional.
To add an out-of-band serial interface to the CSV file:
Column
number
Tag or value Details
1
ADD
The first column for all tags is the
command ADD.
2
NODE-OOBSERIAL-
INTERFACE
Enter the tag as shown.
Tags are not case sensitive.
3 Node Name Enter the same value as entered for
Raritan Port Name.
4 Raritan Device Name Required field.
5 Port Number Required field.
6 Raritan Port Name If left blank, CC-SG will use the
existing port name from the device. If
you enter a new name, the name will
be copied to the device, with the
exception of SX devices.
7 Interface Name Enter the same value as entered for
Raritan Port Name.
8 Baud Rate Valid for SX ports only.