Filter
Top Products
Chapter 15: Advanced Administration
260
Command Alias Description
get_write gw
Gets Write Access. Allows SSH user to
execute commands at target server while
browser user can only observe proceedings.
get_history gh
Gets History. Displays the last few
commands and results at target server.
send_break sb
Sends Break. Breaks the loop in target
server initiated by browser user.
help ?,h
Prints help screen.
End SSH Connections
You can make SSH connections to CC-SG only, or you can make a
connection to CC-SG and then make a connection to a port, device, or
node managed by CC-SG. There are different ways to end these
connections, depending on which part you want to end.
To exit the entire SSH connection to CC-SG:
This command ends the entire SSH connection, including any port,
device, or node connections made through CC-SG.
• At the prompt, type the following command and press the Enter key:
exit
To end a connection to a port, device, or node while remaining
connected to CC-SG:
You can use the escape character to end a connection to a port, device,
or node while keeping your SSH connection to CC-SG open.
The default escape character is a tilde followed by a period.
• At the prompt, type the following command and press Enter:
~.
You may have problems using the escape character in the Linux
terminal or client. Raritan recommends that you define a new escape
character when establishing a port connection. The command is
connect [-e <escape_char>] [port_id]. For example, to
define "m" as the escape character when connecting to the port with id
2360, type connect -e m 2360.