DMP Electronics XR500 Home Security System User Manual


  Open as PDF
of 84
 
XR500 Series Canadian Programming Guide Digital Monitoring Products
73
aPPendiX
23.14 Area Account Number Messages
XR500 systems send an area account number instead of the system account number with the following
panelmessages/eventsbasedontheareaassignedtothezonethatinitiatedthealarm:
WARNING:AlarmBellSilenced(S34)•
AbortSignalReceived(S45)•
CancelSignalReceived(S49)•
ALERT:SystemRecentlyArmed(S78)•
ALERT:ExitError(S80)•
ALARM:VerifySignalReceived(S96)(notcurrentlysentonareaarmingsystems)•
The XR500 has always sent the area account number for the following messages:
Zoneeventmessagesforallnon-24hourzonesassignedtoanarea•
Arming•
Disarming•
The XR500 sends the following messages using the area account number based on the lowest area number
in Display Areas programming from the keypad being used:
UserCodeAdd/Change/Delete•
DoorAccess/Denied•
User 1 Ambush and Early Morning Ambush•
SystemTestBegin/End•
Unauthorized Entry•
Service Code and Service Request•
The XR500 sends the following messages using the area account number based on the area number:
LatetoArmforareaschedules•
 previous next