DMP Electronics XR500 Home Security System User Manual


  Open as PDF
of 84
 
Digital Monitoring Products XR500 Series Canadian Programming Guide
26
SySTem rePorTS
8.8
AMBUSH NO YES
Ambush
YES allows an ambush report to be sent anytime user code number 1 is entered at
akeypad.NOdisablestheambushreportandallowsusernumber1tooperatethe
same as all other codes.
8.9
PANIC TST NO YES
Panic Test Communication (XR500N/XR500E only)
YESallowsthepaniczonetestvericationandfailureresultstobesenttothe
centralstationreceiver.NOdisablesthepanictestreport.Thedefaultsettingis
NO.Thesystemteststart,stop,paniczoneverication,andpaniczonefailure
messages sent to the central station and the trips count operation are the same as
usedundertheWalktest.SeeUsingtheWalkTestsectionintheAppendix.
 previous next