DMP Electronics XR500 Home Security System User Manual


  Open as PDF
of 84
 
Digital Monitoring Products XR500 Series Canadian Programming Guide
38
menu diSPlay
Menu Display
14.1
MENU DISPLAY
Menu Display
Menu Display allows you to select at which keypad addresses the user can access the
following functions.
Toselectakeypad,enterthedevicenumber(keypadaddress)usingthedigitkeys
onthekeypad.Whenakeypadisselected,anasteriskappearsnexttothekeypad
address.Enterthenumberagaintodeselectthekeypad.PresstheCOMMANDkey
todisplaythenextsetofkeypads(9through16).RefertotheMultipleDisplays
section at the beginning of this document.
14.2
ARMED STATUS:
Armed Status
Enterthekeypadaddresses(1through16)thatshowthearmedareas.TheUser
Menu Armed Areas function also displays the custom area name you enter in Area
Information.
Whenonlyareasonetoeightareused,theArmedStatusdisplayis12345678.
WhenareasnineorhigherareusedthesystemArmedStatusdisplayreadsALL
SYSTEMONorSYSTEMON.PresstheCOMMANDkeytodisplayadditionalareas.
Refer to the Multiple Displays section at the beginning of this document and in the
XR500User’sGuide(LT-0683CAN).
14.3
TIME DISPLAY:
Time
Enter the keypad addresses that can display the time and day of the week.
14.4
ARM/DIS DISPLAY:
Arm/Disarm
Enter the keypad addresses from which users can arm and disarm areas.
 previous next