DMP Electronics XR500 Home Security System User Manual


  Open as PDF
of 84
 
Digital Monitoring Products XR500 Series Canadian Programming Guide
66
aPPendiX
If ENHANCED ZONE TEST is selected as YES:
A Verify message is sent at the time the zone trip occurs instead of at the end of the
WalkTest.ForFI,FVorSVzonetypes,theVerifymessageissentattheinitialtrip.
For all other zone types, the Verify message is sent when the zone restores. This
allows the Central Station to count the number of devices per zone.
END - SelectENDtostoptheWalkTest.WhentheWalkTestendsora20-minute
time-outexpires,analSensorResetoccurs.TheSystemTestEndmessageis
sent to the receiver along with Verify and Fail messages for each zone under test.
Faulted zones then display on the keypad.
CKIN:XXX/ZZZ END
Trip Counter For DMP Wireless Check-in Test (WLS)
Displays the number of wireless zones that automatically communicate a supervision
check-inmessage.
• Thenumberofzonesthatcheckin.(XXXintheexample).
• Thetotalnumberofwirelesszonesprogrammedforsupervisionthatshould
checkin.(ZZZintheexample).
END -SelectENDtostoptheWirelessCheck-inTest.Whenthetestendsor
a20-minutetime-outexpires,normalwirelesszoneprocessingreturns.If
alltransmitterscheck-in,bothnumbersmatchwithinthree(3)minutes.Ifa
transmitterhasmultiplezones(1101,1114,etc.),allzonesareincludedinthe
counts. Failed wireless zones display on the keypad.
TEST END WARNING
Test End Warning
Whenveminutesremainonthe20minuteWalkTesttimer,thekeypaddisplays
TESTENDWARNING.Ifnoadditionaltestzonetripsoccur,thetestendsandanal
Sensor Reset automatically occurs. The System Test End message is sent to the
receiveralongwithVerifyandFailmessagesforeachzoneunderWalktest.Faulted
zones then display on the keypad.
Failed Zones Display
ZONE: 10 -FAIL
Foreachzonethatdidnottrip(failed)atleastonceduringtheWalkTest,all
keypads with matching Area Display programming display the zone name and number
andbuzzforonesecond.Anyselected(*FI*PN*SV)24-hourzonethatisfaultedat
theendoftheWalkTestdisplaysatroubleconditionforthatzoneregardlessofthe
message programmed for the open or short condition of the zone and a zone trouble
issenttothereceiver.PresstheCOMMANDkeytodisplaythenextfailedzone.
Note:FortheWirelessCheck-inTest,failedwirelesszonesdisplayonlyonthe
keypad.ZoneVerify/Failreportsarenotsenttothecentralstationreceiverforthe
wirelesscheck-intest.
Local Printer for Walk Test
WhentheWalkTestiscompleted,aVerifyorFailmessageforeachzonetestedprintstothelocalprinter.
TheWalkTestmessagesprintingisenabledthroughPrinterReportsprogramming.
Note:IfENHANCEDZONETESTisselectedasYES,theVerifymessagesareprintedatthetimethezone
trip occurs and not printed at the test end.
23.5 Keypad Speaker Operation
WhenusingLCDKeypads,thepanelprovidesdistinctspeakertonesfromthekeypadforFire,Burglary,
ZoneMonitor,andPrewarnevents.Thelistbelowdetailstheconditionsunderwhichthespeakeristurned
on and off for each event.
Fire On-FirezonealarmandBellOutputorFireBellOutputisON.
Off -AlarmSilence.
Burglary On -BurglaryzonealarmandBellOutputorBurglaryBellOutputisON.
Off-AlarmSilence.
Zone Monitor On-Onetimeonlywhenamonitoredzoneistripped.
Off-Afteronetone.
Prewarn On-DuringEntryDelay.
Off-WhenEntryDelayexpires.
SOUTH LOBBY
 previous next