Filter
Top Products
8. Getting started
- Navigate to Options > AutoGeometry > Warp AutoGeometry and check Enable Warp AutoGeometry check box;
Image 8-100
Enabling the Warp AutoGeometry
- Navigate to Power Switch page and switch ON the concerned LDAT device(s).
5. In the Positioning Page navigate to Position > Position type and select AutoGeometry from the drop down list.
Image 8-101
Selecting the AutoGeometry position
6. From the Select Cam era, Spectrometer and Las er section select the Camera to be used from the drop down lists.
R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013
91