Filter
Top Products
10. Operating Acuras
Image 10-29
Example: selecting the desired realignment setting
5. Press Start Realignment.
Image 10-30
Pressing the Start Realignment button
6. In the appearing A curas dialog,
-pressSelected Grou p to run the Acuras realignment process to all projectors of the selected group.
-pressSelected Projector to run the Acuras realignment process to the selected projector(s) of the selected group.
-pressC ancel to abort the Acuras realignment process.
Image 10-31
Acuras dialog
Note: The unselected projector(s) and the projector(s) on which the A curas realignment process is not running go to pause
state.
Note: If different head locations were used during the definition of Acur as positions, the user will be prompted to move t he
AutoAlignment H ead to the corresponding physical locations during the Acur as rea lignment process
Image 10-32
It may take few minutes to complete the Acuras realignment operation for each projector.
Image 10-33
Acuras realignment process in progress
R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013 127