Filter
Top Products
8. Getting started
Image 8-109
Selecting the projector(s)
12.Press Save to save this position.
Image 8-110
Saving the new position
An Alert dialog appears to ask the user to verify the AutoAlignment Head location. If at the correct location press Yes to continue.
If not at the correct location, then you need to physically position the AutoAlignment Head to the correct location and start the
procedure from step 5 once again.
Image 8-111
Alert dialog
13.In the appearing Status Information dialog, press Yes to save this position or to modified selected position.
Image 8-112
Desired position saved successfully
R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013 95