Filter
Top Products
6. Specifications
Label in the image
Description (standard version) Description (rugged version)
C
Location pin Ø 6mm Location pin Ø 6mm
D Air grid Air grid
E
M6 Mounting studs (and washers + nuts) M6 Mounting studs (and washers + nuts)
F Emergency stop Emergency stop
G
Mains power switch Mains power switch
H Mains power connector Mains power connector
I
SFTP CAT5e connector (covered by a lid) SFTP CAT5e connector (covered by a lid)
6.2 Gimbal range
Gimbal range
The Gimbal has two degrees of freedom (DOF): pan and tilt. Pan is the left/right rotation if th
e AutoAlignment Head is in table
position. Tilt is the up / down tilting if in table position.
. The limits are indicated below:
• PAN: range is between -180° and +180° for both AutoAlignment Head versions;
-180°+180°
Image 6-7
AutoAlignment Head (standard version) : Pan range
-180°+180°
Image 6-8
AutoAlignment Head (rugged version) : Pan range
R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013 33