Barco R9843500 Pet Fence User Manual


 
14. Replacing devices
Image 14-8
Section: Laser
2. Select the laser to be replaced from the drop down list.
Image 14-9
Selecting old laser
3. Enter the serial ID of the new laser.
Note: Serial number of the laser can be read from the XDS RACU Server Console or from the label attached to the dev ice.
Serial number of the laser can also be read from the Select the laser to be replaced drop dow n list (image 14-9). XDS
RACU automatically assigns an ID to each connected laser. The ID has format laserX, where X is a digit thatis increased
by one for ev ery newly connected laser. The last connected laser has the highest digit in its ID.
4. Press the Replace button to conrm the replacement.
Image 14-10
Conrming the laser replacement
A message appearing in the feedback section shows the progress information.
R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013
153