Filter
Top Products
12. Operating AutoGeometry: Warp display
The Delete Realigned Data... bu tton w ill appear automatically on the AutoGeom etry page, whenever the first
warp rea lignment data is saved on the projector(s) in a display syste m.
How to delete Warp Realignment data?
1. Navigate to the AutoGeometry page and select the desired projector(s) or group for which the realigned data needs to be deleted
Image 12-17
Selecting a projector
2. Press Delete Realigned Data...
Image 12-18
Stating the deleting process
3. In the appearing Delete Realign data dialog do either of the following:
-pressSelected Grou p to delete the warp realignment data from all projectors of the selected group;
-pressSelected Projector(s) to delete the warp realignment data from the selected projector(s) of the selected group;
-pressCancel to abort the warp realignment deletion process.
Image 12-19
Selecting the projector
4. In the appearing Delete Realignment dialog do the followi
ng:
- select an eyepoint from the drop down list whose warp realignment data is to be deleted;
Image 12-20
Selecting an eyepoint and setting the check box
- select the realign data of this eyepoint to be deleted, by checking the its checkbox;
-pressDelete to proceed.
Image 12-21
Pressing the Delete button
5. In the appearing Delete Realign dat a dialog, press Yes to delete the selected realigned data of an eyepoint.
142
R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013