Filter
Top Products
3. Compliancy
3. COMPLIANCY
Introduction
To meet EMC compliancy, it is required to take some precaution. See topic below.
Overview
• EMC shielding clamps
3.1 EMC shielding clamps
EMC shielding clamps
When replacing some of the cables, always put back the EMC shielding clamps (Ferrites) intheir original position if they were present
before.
Image 3-1
EMC shielding clamp
Depending on the type of EMC shielding clamp, use a pair of cutting pliers and/or a slotted screwdriver to open the clamp.
Some cables must make a loop through the EC shielding clamps!
R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013 17