Filter
Top Products
14. Replacing devices
14. REPLACING DEVICES
Introduction
The Replace Device tab has two sub tabs: General and Auto Alignment and each tab has three sections. The General tab has fol-
lowing sections: Projector, Motorized Blend Plate and IP Link Power Switch Device. The Auto Alignment tab has following sections:
Camera, Spectrometer and Laser.
The procedures below describes how to replace a Camera, Spectrometer and Laser with their new ones.
Image 14-1
For projector, mo torized blend plate and IP Link Power Switch Device replacement see the XD S RACU User
guide: R59770508.
Overview
• Replacing a camera
• Replacing a spectrometer
• Replacing a laser
14.1 Replacing a camera
How to replace a Camera?
1. In the Options page, navigate to Replace Device > Ca mera.
Image 14-2
Section: Camera
2. Select the camera to be replaced from the drop down list.
Image 14-3
Selecting old camera
R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013 151