Filter
Top Products
2. Safety
2Clampedfingers
Position of the safety labels (on rugged version)
Image 2-4
Labels: position
1 Check manual for shipping instruction
2 Laser aperture
3 Laser radiation
Image 2-5
Labels: position
1Movingparts
2 Emergency stop
3 Refer to manual for information
4 RJ45 connector is not an Ethernet connection
2.2 Safety and warnings
About this chapter
It is necessary to read this chapter prior to starting any activity on the device. It contains valuable and critical information to ensure
safety of the operator, the service technician or other people in the neighborhood of the device.
Overview
• Notice on safety
• Installation instructions
• Owner’s record
• Warnings
• Plug types
• Prevent personal injury
• Device damage
• Environment condition check
• Repacking
• Emergency stop
•Movingparts
• Class 2 laser
• SFTP Cat.5e cable warning
• Vibrations
2.2.1 Notice on safety
Notice on Safety
This equipment is built in accordance with the requirements of the international safety standards IEC60950-1, EN60950-1,
UL60950-1 and CAN/CSA - C22.2 No.60950-1, which are the safety standards of information technology equipment including
electrical business equipment. These safety standards impose important requirements on the use of safety critical components,
10
R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013