Filter
Top Products
4. Packaging
4.3.1 Removing the shipping bracket
Necessary tools
Torx screwdriver T10
How to remove t he shipping bracket?
1. Remove all screws fixing the shipping bracket to the AutoAlignment Head.
Image 4-5
Shipping bracket removal: standard version
Image 4-6
Shipping bracket removal: rugged version
2. Remove the shipping bracket.
3. Insert all screws in the AutoAlignment Head again and tighten them.
4.3.2 Installing the shipping bracket
CAUTION: The shipping bracket m ust always be installed on the AutoAlignmen t Head prior to shipping it!
Necessary tools
Torx screwdriver T10
How to install the shipping bracket?
1. Adjust pan and tilt to align the holes on the AutoAlignment Head exactly to the holes on the shipping bracket. This corresponds
to pan 90° / tilt 0° for the standard version and pan 0° / tilt 0° for the rugged version.
R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013
23