Filter
Top Products
8. Getting started
Image 8-79
Gimbal control arrows
Note: A good practice is to br ing as many corners inside the camera live view.
Note: Make sure that the channe l corners are not too close to the edges of the Camera Live view. In practice, they should not
be within the outer 15% border of the camera live view. Also en
sureasufficient portion of each c hannel is visible in the
came ra field of view.
100%
100%
15%
15%
15%
2
3
1
15%
A
B
Image 8-80
Bad example: one of the channel corners are not within 15%of camera live view
A 15% border of the Camera Live view
B CameraLiveview
2
3
1
100%
100%
15%
15%
15%
15%
A
B
Image 8-81
Good example: channels corners within 15% of camera liveview
A 15% border of the Camera Live view
B Camera Live view
Note: Use the S tep size buttons to increase or decrease the adjustment steps of the Gimbal.
Note: Press the R button to control the Gimbal movem ents using the navigation buttons on the eRACU hand held unit.
8. Select Without Blend Zone or With Blend Zone from the Pos ition subtype drop down list.
82
R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013