Filter
Top Products
2
CAUTION
Do not touch the button with wet fingers.
An electric shock or machine trouble may be
caused.
Do not disassemble this unit.
This may provide danger to touch the internal
circuit board, or cause machine trouble.
Do not wipe the unit with benzene, thinner or
chemical waste.
Neglecting this may change the color or machine
trouble. When it is seriously dirty, first remove it
with a squeezed cloth once damped with neutral
detergent dissolved in water, and then clean with
a dry cloth.
Do not use with other application or software.
Use this product exclusively for TG-2000A.
Otherwise erroneous action may be caused.
When installing the unit in a hospital or communication station, provide sufficient protection
against noise.
Erroneous operation or machine trouble may be caused by the effect of inverter equipment, private
power generator, high-frequency medical equipment, wireless communication equipment, etc.
Conversely it may affect such equipment, creating noise to disturb medical treatment or image
broadcasting.
Please observe the operating temperature
range.
Using under the environment outside of the
operating temperature range may cause a
serious trouble. Confirm the operating
temperature range by the specification in the
instruction manual. If not listed, use a range of 0
~ 40°C.
Do not draw or twist the transmission line.
Neglecting this may cause a fire or machine
trouble.
Use a standard wire meeting the current
capacity for wiring.
Otherwise an electric leakage or fire may be
caused.
Be careful for children.
The inspection or adjustment work may be
accompanied with danger. Do not allow children
to enter the site.