Filter
Top Products
39
7-3 Weekly schedule of the integrated software
Registering the weekly/annual schedule license number in the G-50A main unit using the PC’s browser,
will enable this function. In this case, the weekly schedule of the G-50A will be invalidated while the data
previously set with the web monitor will be validated.
For the schedule set with the TG-2000A software, settings are set per target unit (group, block, floor, etc.)
in the schedule set screen of the TG-2000A.
12 operation settings are possible for every day of the
week. It is also possible to set the contents for [Operation
mode] only or [Setting temperature] only.
For the setting data two
patterns, namely [Summer
Master] and [Winter Master]
are available to facilitate
switching depending on the
season.
Figure 7-4 TG-2000A schedule set screen
TG-2000A
Schedule data
[Summer Master]
Schedule data
[Winter Master]
Schedule data
[G-50A Master]
Schedule data
[G-50A Master]
G-50A
Web control PC
By absorbing the
schedule data of the
G-50A, the data is
entered in the [G-
50A Master] within
the TG-2000A
software.
By transmitting the [Summer Master] and [Winter Master] stored in the TG-2000A software, the G-
50A will execute that schedule.
* Switching between the [Summer Master] and the [Winter Master] requires the corresponding
operation of the TG-2000A software.
Displays the contents
of the G-50A Master.
Figure 7-5 TG-2000A schedule chart
The schedule functions when performed with the TG-2000A are similar to the settings performed with the
Web browser, except for the possibility to store the two patterns [Summer Master] and [Winter Master].
The [Summer Master] and [Winter Master] set with the integrated software are stored, to enable
transmission to the G-50A main unit in accordance with the user’s needs. By transmitting these data to the
G-50A, they become the [G-50A Master data] and will be executed by the schedule of the G-50A main unit.