Mitsumi electronic G-50A Air Conditioner User Manual


 
44
8.3 Basic Composition and Required Materials
8.3.1 Manual input of electric power consumption
This method is only applicable to the charging of electric power consumed by air conditioners.
(1) Basic composition
(2) Required materials
Table 8-1 shows the materials required to carry out the electric power manual input method.
Charge
license
ME remote
controller
ME remote
controller
LOSSNAY
LOSSNAY
Uninterrupted
power source (UPS)
Power supply
unit
PC for centralized control
Install integrated software
G-50A
Input
Figure 8-7 Basic composition of electric power manual input method
Table 8-1 Materials required for simplified charging
Name (Model name)
PC for centralized control
PC for apportioning
Integrated software (PAC-TG2000A)
Charge license
Web monitor license
Uninterrupted power sourse (UPS)
Manufacturer
PC/AT convertible unit
PC/AT convertible unit
Mitsubishi Electric
Mitsubishi Electric
Mitsubishi Electric
Mitsubishi Electric
(referense)
Remarks
Confirmed operation of IBM, DELL, Hp Compaq.
For PC spec., refer to Table 6-4.
PC for apportioned calculation of each tenant using CSV file
output from TG-2000A.
Requires the table calculation software (EXCEL).
1
Requires for each G-50A.
Requires for each G-50A.
FREQUPS A-series.
(Line interactive system)
1
This software (apportioning support software) is in the install disk of TG-2000A.