Filter
Top Products
29
Remote
controller
operation screen
Data update Data is updated automatically
Operation status is updated every minute, while the status
of any abnormalities is updated every 3 minutes.
Data is updated manually
Status update is invoked by changing screens (automatic
update is scheduled from April)
Operations and monitoring available with the web browser
(Internet Explorer) software
Operations and monitoring available with the integrated
(optional) software
Request
● In the case of centralized control, the user is asked to make periodic revisions (approx.
once a week) in the TG-2000A program and restart the Windows XP/2000 OS each time.
(Please perform restarting between 8:00 and 21:45)
● In order to keep the TG-2000A program in operation 24 hours a day, please keep the
power connected to the PC at all times.
(In order not to interrupt the program, please do not use the [System Standby] or
[System Pause Status] functions of the power supply options.
Notice
● Since latent problems may occur if the Windows XP/2000 OS is operated for extended
periods of time, it is recommended to periodically shut down the TG-2000A and the OS
and restart the system.
● Within the [User Setup] of the TG-2000A, the [Auto Reboot Setting] is available.
This function is a backup function to prevent the user from forgetting to perform the
previously stated tasks.
In case any problems occur during auto reboot, recovery has to be performed manually.
Since any problems could still remain, it is recommended to manually perform this work
on a periodic base.