Mitsubishi Electronics C6 Home Safety Product User Manual


 
4. Parameters
4.2 Bit Selection Parameters
- 59 -
4.2 Bit Selection Parameters
The parameters that can be used in user PLC include bit selection parameters set in the bit type.
Set up data is stored in a file register and is backed up.
For use in bit operation in a sequence program, the file register contents are transferred to temporary
memory (M) using the MOV command. In contrast, if data is stored in the file register corresponding
to bit selection by using the MOV command etc., it is backed up. However, display remains
unchanged. Once display another screen and again select screen.
The corresponding between the bit selection parameters and file registers is listed below. The setting
and display screens are also shown.
#
Corresponding
file register
#
Corresponding
file register
#
Corresponding
file register
#
Corresponding
file register
6401 R4600-LOW 6433 R4616-LOW 6449 R4624-LOW 6481 R4640-LOW
6402 R4600-HIGH 6434 R4616-HIGH 6450 R4624-HIGH 6482 R4640-HIGH
6403 R4601-L 6435 R4617-L 6451 R4625-L 6483 R4641-L
6404 R4601-H 6436 R4617-H 6452 R4625-H 6484 R4641-H
6405 R4602-L 6437 R4618-L 6453 R4626-L 6485 R4642-L
6406 R4602-H 6438 R4618-H 6454 R4626-H 6486 R4642-H
6407 R4603-L 6439 R4619-L 6455 R4627-L 6487 R4643-L
6408 R4603-H 6440 R4619-H 6456 R4627-H 6488 R4643-H
6409 R4604-L 6441 R4620-L 6457 R4628-L 6489 R4644-L
6410 R4604-H 6442 R4620-H 6458 R4628-H 6490 R4644-H
6411 R4605-L 6443 R4621-L 6459 R4629-L 6491 R4645-L
6412 R4605-H 6444 R4621-H 6460 R4629-H 6492 R4645-H
6413 R4606-L 6445 R4622-L 6461 R4630-L 6493 R4646-L
6414 R4606-H 6446 R4622-H 6462 R4630-H 6494 R4646-H
6415 R4607-L 6447 R4623-L 6463 R4631-L 6495 R4647-L
6416 R4607-H 6448 R4623-H 6464 R4631-H 6496 R4647-H
6417 R4608-L 6465 R4632-L
6418 R4608-H 6466 R4632-H
6419 R4609-L 6467 R4633-L
6420 R4609-H 6468 R4633-H
6421 R4610-L 6469 R4634-L
6422 R4610-H 6470 R4634-H
6423 R4611-L
Use bit selection
parameters
#6401~#6448 freely.
6471 R4635-L
Bit selection parameter
#6449~#6496 are PLC
operation selection
parameters used by the
machine manufacturer
and MITSUBISHI. The
contents are fixed.
6424 R4611-H 6472 R4635-H
6425 R4612-L 6473 R4636-L
6426 R4612-H 6474 R4636-H
6427 R4613-L 6475 R4637-L
6428 R4613-H 6476 R4637-H
6429 R4614-L 6477 R4638-L
6430 R4614-H 6478 R4638-H
6431 R4615-L 6479 R4639-L
6432 R4615-H 6480 R4639-H