Filter
Top Products
10. Exclusive Commands 2
10.1 ATC Exclusive Command
- 350 -
(11) Automatic tool data write
All tool Nos. are written (entered) in batch. This command is used for initialization, etc.
The data are written one after another for each tool, starting from the default value.
1000
2
1008 (0)
1009 (1)
1000 (2)
1001 (3)
1006 (8)
1007 (9)
Register No. where default value is stored
Default value
Pointer
1002 (4)
1004 (6)
1003 (5)
1005 (7)
Tool data table head
Tool data of the number of tools are written
while incrementing the default value indicated
by pointer by one.
(Note) When pointer is not used, R4715 should be
set to "zero".
(Ex.) MOV K0 R4715
R4752
：
：
：
：
R4000
R4001
R4040
R4715
R4750
R4751
：
R4759
R4758
4040
M10 R4710 R4000 S.ATC K11
ACT