Filter
Top Products
8. Function Commands
DMOV, DMOVP
- 208 -
{ DMOV, DMOVP ... 32-bit data transmission
Usable device
Bit device Word device
Con-
stant
Pointer
X Y M L F BSB T SM VTCDRWSWZSDKH P
Digit
desig-
nation
Index
No. of
steps
S
{
{ { { { { {
{
{ { { { { { { { { {
D
*1
{ { { { { {
{
{ { { { { { { {
{ {
3/4
*1 Destination device X of DMOV command is reserved for the test by Mitsubishi.
Be sure not to use this device with DMOV even if it is possible to program.
Transmission command
DMOV
DMOVP
DMOV
S
D
DMOVP
S
D
Setting data
D
Transmission source data
or head No. of device
where data is stored.
S
Head No. of transmission
destination device.
Function
The 32-bit data of the device designated with S is transmitted to the device designated with D.
Before transmission S
After transmission D
00 11011 0011111
Transmission
32-bit
00 110110011111
Execution conditions
The execution conditions for DMOV, DMOVP are as shown below.
Transmission command OFF
DMOV
ON
Executed per scan
Executed per scan
DMOVP