Filter
Top Products
i
Introduction
These specifications are the programming manual used when creating the sequence
program with the PLC development software, or Mitsubishi Electric Co.’s integrated FA
software MELSOFT series (GX Developer).
The PLC (Programmable Logic Controller) is largely divided into the basic commands,
function commands and exclusive commands, and ample command types are available.
The commands can be used according to the purpose and application such as the PLC
support function used when supporting the user PLCs.
In addition to the explanation of commands and functions, the environment to develop the
user PLC using GX Developer, especially the usage unique to MELDAS, is described.
CAUTION
For items described as "Restrictions" or "Usable State" in this manual, the instruction
manual issued by the machine manufacturer takes precedence over this manual.
An effort has been made to describe special handling of this machine, but items that are
not described must be interpreted as "not possible".
This manual is written on the assumption that all option functions are added. Refer to the
specifications issued by the machine manufacturer before starting use.
Refer to the Instruction Manual issued by each machine manufacturer for details on each
machine tool.
Some screens and functions may differ or some functions may not be usable depending
on the NC version.
Refer to the related operation manuals for details of GX Developer and GX Converter
usage.
[Documents relating to MELDAS C6/C64]
MELDAS C6/C64/C64T PLC Interface Manual ................................. BNP-B2261
MELDAS C6/C64 Network Manual.................................................... BNP-B2373