Filter
Top Products
Appendix 3. PLC Development Environment using GPPQ
3.6 PLC-Related Data Development Procedure
- 457 -
3.6.4 Conversion to GPPQ Data
"CNVQ (data conversion software package)" is used in the conversion from text data to GPPQ data.
It is also possible to convert to GPPQ data from spreadsheet software instead of text data. Refer to
the Operating Manual for details.
(1) Initialization
After CNVQ is started, the project file (file for setting the drive/path name, system name, machine
name, file name, etc.) is read or newly created.
Refer to the Operating Manual for the operation method.
(2) Conversion Format Setting
The screen is selected from the menu using the following CNVQ basic operation.
3
Alt ( GRPH )
3
Conversion
format setting
F11 ( HOME CLR )
7
2
Mode
selection
menu screen
Conversion
format set-
ting screen
Menu
Conversion
format change
Conversion
format change
menu window
Command
list
Command
list menu
window
Text format
setting
Command list
(text format
setting)
screen
Mode
The conversion format is set on the following screen. Select the "Statement" item shown by the
arrow (1) when converting message data.
Refer to the Operating Manual for details.
[Command list (text format setting)]
1. Delimter
1. ( * ) Tab 1. ( * ) Auto Adjust (1Tab [ 8]Column)
2. ( ) Left Align
3. ( ) Specify [ 1]Tab
2. ( * ) Space 1. ( * ) Auto Adjust
2. ( ) Left Align
3. ( ) Specify [ 1]Column
2. Input Conditions
1. ( ) Step #
2. ( ) Device Comment
3. ( * ) Statement
4. ( ) Note
5. ( ) Device Label
6. ( ) Without NOP
Execute(Y) Cancel(N)
Space : Select Esc : Close
(1)