Mitsubishi Electronics C6 Home Safety Product User Manual


 
10. Exclusive Commands 2
- 334 -
10. Exclusive Commands 2
Although the basic and functional commands are not used only for specific purposes, some
commands may be efficient if command applications such as data transfer between under PLC and
controller and controller display screen are limited.
Then, we provide a number of exclusive commands which are explained below.
Refer to "9. Exclusive Command 1".
Examples of exclusive commands:
· Intelligent function command (FROM, TO)
· Transient command (OPEN, CLOSE, BUFSND, BUFRCV)
· Transient transmission command
(READ, SREAD, WRITE, SWRITE, RIRD, RIWT)
· ATC dedicated command (ATC)
· Rotary body control command (ROT)
· Tool life management exclusive command (TSRH)
· DDB (direct data bus) ..... asynchronous
· External search ............... synchronous
Refer to "10. Exclusive Command 2".