Filter
Top Products
7. Basic Commands
RST
- 128 -
{ RST ... Device resetting
Usable device
Bit device Word device
Con-
stant
Pointer
X Y M L F BSB T SM VTCDRWSWZSDKH P
Digit
desig-
nation
Index
No. of
steps
D
{
{ { { { { {
{
{ {
{
1/2
(Note) In the modification of index, 2 steps are used for B or SB device.
2 steps are used for T or C device, also.
Reset command
RST
D
Setting data
D
Device No. to
be reset
Function
(1) The designated device will change as explained below when the RST input turns ON.
Device Status
Y, M, L, SM, F The coil and contact are turned OFF.
T, C 0 is set for the current value, and the coil and
contact are turned OFF.
(2) If the RST input is OFF, the state of the device will not change.
Execution condition
The execution conditions for the RST command are as shown below.
RST input OFF
RST
ON
Executed per scan Executed per scan