Filter
Top Products
1. PLC Development Environment Using GX Developer
1.1 Function
- 3 -
1.1.3 GX Developer Functions Supported by C64 Series
The GX Developer functions explained here are those supported by the C64 Series in the "off-line
functions" operated with the GX Developer independently and "on-line functions" carried out
connected to the CNC controller.
Refer to the enclosed Operating Manual for details of respective functions.
Refer to "Appendix 3. Operation Methods Using GPPQ" for the GPPQ-specific functions and
operations when the DOS version "GPPQ" (SW2IVD/NX-GPPQ GPP function software package) is
used.
1.1.3.1 Function Support Conditions (general section)
The following shows a list of GX Developer outline functions supported by the C64 Series.
A
mark indicates functions that can be used by the C64 Series. An
r
mark indicates that the
function cannot be used because it is related to "MELSEC Series" characteristic functions. The
function details during on-line are described in the next section.
List of general section functions (1)
: Possible,
: Limitedly possible, U : Not possible
Program type Support Remarks
Ladder
List
SFC
U
MELSAP-L
U
Function block
U
Function Menu Sub menu Support Remarks
Project New project
Open project
Close project
Save
Save as
Delete project
Verify
Copy
Edit Data New
Copy
Delete
Rename
Change PLC type
Fixed Q4A
Import file Import from GPPQ format file
Import from GPPA format file
U
Import from FXGP[WIN] format file
U
Import from FXGP[DOS] format file
U
Export file Export to GPPQ format files
Export to GPPA format files
U
Export to FXGP[WIN] format file
U
Export to FXGP[DOS] format file
U
Export to TEXT ,CSV format file