Filter
Top Products
Appendix 3. PLC Development Environment using GPPQ
3.3 GPPQ Function Outline and Functions Supported by the C64 Series
- 438 -
3.3.2 Function Support Conditions (on-line section)
The following shows a list of GPPQ on-line functions supported by the C64 Series.
A mark indicates functions that can currently be used by the C64 Series. An
r
mark indicates
that the function cannot be used because it is related to "QnA Series" characteristic functions.
List of on-line section functions (1)
: Possible,
r
: Support not possible/not determined
Mode Function Menu Detailed function Support Remarks
6.2 Circuit write 6.2.1 Write during run
6.3 Circuit read 6.3.1 Step No. read
6.3.2 Command read
6.3.3 Device read
6.3.4 Contact and coil designation
read
6.3.5 Statement and note
designation read
6.3.6 Last circuit designation read
Monitor destination CPU name
No. of Monitor program steps
Monitor program name
Scan time
Monitor interval
CPU operation status
Monitor destination
6.4.1 Monitor screen common
display
Flicker during communication
Bit device monitor display
Word device monitor display
Digit designation monitor display
Timer/counter monitor display
Double word monitor display
Index modification monitor display
Monitor step changeover
Changeover to next circuit block
Changeover to previous circuit block
Monitor stop
6.4.2 Circuit monitor
Monitor column numeric value/No. of
display levels changeover
Bit device monitor display
Word device monitor display
Digit designation monitor display
Timer/counter monitor display
Double word monitor display
Index modification monitor display
16-bit integer designation
32-bit integer designation
Real number designation
r
Character designation
r
6.4.3 Device registration monitor
Registration device erase
Circuit
mode
6.4 Monitor
6.4.4 ON/OFF cause automatic
search