Chapter 3. IBM iSeries and AS/400e 250 models and packages 65
#2824 #2824 PCI Feature Controller
The #2824 PCI Feature Controller for LAN/WAN/Workstation has 32 MB of memory. In the #7102 System Expansion
Unit, one Base Controller (CCIN 2824) is supplied as standard with no feature required. See “Base IOP” on page 64.
It can be installed in slot E07 in the #7102 System Expansion Unit.
The #2824 PCI Feature Controller provides support for two low-speed PCI card slots E11 and E12, and one high-speed
PCI card slot E03.
Slot E03 can only be used if no #2866 PCI Integrated Netfinity Server card is installed in slots E02/E04.
Slot E03 supports one of #2718, #2723, #2724, #2745, #2729, #2746, #2750, #2751, #2761, #281x, #2838, or
#4801.
Slots E11 and E12 support #2723, #2724, #2745, and #2746.
There is a maximum of one high-speed LAN/ATM with no additional LAN per controller, or there is a maximum of
two low-speed LANs with no high-speed LAN/ATM per controller.
There is a maximum of one low-speed LAN supported in E11/E12 if a #2866 PCI Integrated Netfinity Server is
installed in E02/E04.
Maximum: One in the #7102 System Expansion Unit
Minimum operating system level: OS/400 V4R4
The #2824 is a Customer Install Feature for an MES that only includes CIF features.
The #2824 was withdrawn from marketing on 21 November 2003.
Communications
Comm.
Restrictions
See “Comm. Restrictions” on page 103, for communications rules and restrictions.
#2720
#9720
#2720 Base PCI WAN/Twinaxial IOA
The #2720 is a combined twinaxial/communications adapter that can be included as a base in the Model 250. It provides
four ports that support a maximum of 28 twinaxial devices. It also provides a single communications line. It is mutually
exclusive with #0398. The #2720 is not supported by the IBM marketing configurator. It is for RPO. The #2720 is provided
for clients who want to change to a twinaxial console. The #9720 is supported for upgrades only. The #0348
V.24/EIA232 20-ft. (6m) PCI cable is required for ECS.
PCI slots required: One
Maximum: One
The #2720 was withdrawn from marketing on 02 July 2002, except as part of the Model 250 packages.
#2745 #2745 PCI 2-Line WAN IOA
The #2745 supports up to two multiple protocol communications ports when one or two of the following cables are
attached:
#0348 V.24/EIA232 20-ft. (6m) PCI cable
#0349 V.24/EIA232 50-ft. (15 m) PCI cable
#0353 V.35 20-ft/6 m PCI cable
#0354 V.35 50-ft/6 m PCI cable
#0355 V.35 80-ft/24 m PCI cable
#0356 V.36 20-ft/6 m PCI cable
#0358 V.36 150-ft/45 m PCI cable
#0359 X.21 20-ft/6 m PCI cable
#0360 X.21 50-ft/15 m PCI cable
#0365 V.24/EIA 232 80-ft/24 m PCI cable
#0367 Operations Console PCI Cable (not supported by the IBM marketing configurator)
Communication rules apply. See “Comm. Restrictions” on page 103.
PCI slots required: One (low or high-speed)
The #2745 is a Customer Install Feature.
The #2745 was withdrawn from marketing on 01 October 2004. The recommended replacement is a #2742 2-Line WAN
IOA.
