254 iSeries and AS/400e System Builder
#2790
#2791
#2799
#2790 PCI Integrated Netfinity Server, #2791 PCI Integrated xSeries Server and #2799 PCI Integrated xSeries
Server
The #2790 PCI Integrated Netfinity Server contains a 700 MHz processor. The #2791 PCI Integrated xSeries Server
contains an 850 MHz processor. The #2799 PCI Integrated xSeries Server contains a 1.0 GHz Intel Pentium III processor.
Each processor contains four memory slots in the xSeries IOP.
The #2790, #2791, or #2799 is supported in the system unit of the Models 820, 830, and 840, and #5074 PCI Expansion
Tower, #5075 PCI Expansion Tower, #5078 PCI Expansion Unit, #0588/#5088 PCI-X Expansion Unit, and #5079 1.8 M I/O
Towers.
Each main storage slot of the #2790, #2791, or #2799 server can contain either a 128 MB, 256 MB, or 1024 MB xSeries
server main storage card, providing a total server main storage capacity ranging from 128 MB to 4096 MB (4 GB). A
minimum of one main storage card is required on the xSeries IOP. A maximum of 3712 MB of memory is addressable.
Allowable main storage increments in MB are 128, 256, 384, 512, 640, 768, 896, 1024, 1152, 1280, 1408, 1536, 1664,
1792, 2048, 2176, 2304, 2432, 2560, 3072, 3200, 3328, and 4096.
The following main storage cards provide server memory for the #2790, #2791, or #2799 when installed in a Model 820,
830, and 840 system unit or attachable HSL towers:
#2795 - 128 MB server memory (withdrawn from marketing on 19 November 2004)
#2796 - 256 MB server memory (withdrawn from marketing on 19 November 2004)
#2797 - 1 GB server memory (withdrawn from marketing on 01 June 2006)
#2895 - 128 MB server memory
(Withdrawn from marketing on 19 November 2004 for new orders only. Conversions to feature remain.)
#2896 - 256 MB server memory
(Withdrawn from marketing on 19 November 2004 for new orders only. Conversions to feature remain.)
The #2790, #2791, and #2799 can support PCI 100/16/4 Mbps Token Ring IOAs, PCI 100/10 Mbps Ethernet IOAs, or PCI
1 Gbps Ethernet IOAs in any combination. A minimum of one LAN IOA is required. The supported LAN IOA features are:
#2743 1 Gbps PCI Ethernet IOA
#2744 PCI 100 Mbps Token Ring IOA
#2760 PCI 1 Gbps Ethernet UTP Adapter
#4838 PCI 100/10 Mbps Ethernet IOA
A #0223 100 Mbps Token-Ring specify code is required on the Integrated xSeries Server for each #2744 selected to run
on the #2790, #2791, or #2799.
A #0224 100/10 Mbps Ethernet specify code is required on the Integrated xSeries Server for each #4838 selected to run
on the #2790, #2791, or #2799.
A #0225 1 Gbps Ethernet specify code is required on the Integrated xSeries Server for each #2743/#2760 selected to run
on the #2790, #2791, or #2799.
Up to three IOA LAN features are supported by the #2790, #2791, or #2799, depending on which system or expansion
tower position the #2790, #2791, or #2799 is placed. The #2790, #2791, and #2799 require three PCI card slots on the
Model 820, 830, or 840 system unit backplane. One slot is consumed. The second slot is unusable. The third slot is reduced
to a short card slot which is then used by the first attached LAN IOA card.
The #2790, #2791, and #2799 do not require a #2843 or #9943. However, placement is limited to specific slots within the
specific system tower and expansion tower.
The #2790, #2791, and #2799 support only the Windows NT, Windows 2000 and Windows Server 2003 operating systems.
The Windows 2003 Server operating system is supported at OS/400 V5R2 with PTFs.
The following rules apply:
#0325 IPCS Extension Cable for Windows is the default but can be removed.
#1700 IPCS Keyboard or Mouse for Windows is the default in those countries or regions offering it.
A display must be connected to the #2790 PCI Integrated Netfinity Server to support Windows.
Windows NT is not supported after OS/400 V5R2. Upgrade to Windows 2000.
For a non-U.S. keyboard, mouse and display, see:
http://www.ibm.com/eserver/iseries/integratedxseries/
