Panasonic AW-HE130W Home Security System User Manual


  Open as PDF
of 126
 
Recommended network setting for internet
Performtherecommendedsettingstoconnectthecameratothe
Internet.
Clickingthe“Set”buttondisplaysadialogboxtellingtheuserthat
itemsettingswillbechanged.Afterconfirmingthis,clickthe“OK”
button.
• Camera image’s “JPEG/H.264” tab
JPEG(1)
Imagecapturesize:640×360
JPEG(2)
Imagecapturesize:320×180
JPEG(3)
Imagecapturesize:160×90
H.264(1) • H.264(2) • H.264(3) • H.264(4)
Internetmode(overHTTP):On
Transmissionpriority:Besteffort
H.264(1)
Imagecapturesize:1280×720
Maxbitrate(perclient):Max1024kbps,Min256kbps
H.264(2)
Imagecapturesize:640×360
Maxbitrate(perclient):Max1024kbps,Min128kbps
H.264(3)
Imagecapturesize:320×180
Maxbitrate(perclient):Max1024kbps,Min128kbps
H.264(4)
Imagecapturesize:160×90
Maxbitrate(perclient):Max1024kbps,Min128kbps
• “Network” tab in the Network setting screen
Common IPv6/v4
MaxRTPpacketsize:Limited(1280byte)
HTTPmaxsegmentsize(MSS):Limited(1280byte)
Advanced network setting screen
Clickthe“Advanced”tabinthenetworksettingscreen(→page@@,
page@@)
SettingsrelatingtotheNTP,UPnP,HTTPS,SNMP,andDiffserv
functionsareperformedhere.
Clickthelinkstoeachitemtomovetotherespectivesettingpage.
z NTP
SettingsrelatingtotheNTPserveraddressandportNo.are
performedhere.
NTP server address setting
SelectthemethodtoacquiretheNTPserveraddress.
Setting value:
Auto AcquirestheNTPserveraddressfromtheDHCPserver.
Manual
SetstheaddressbyinputtingtheNTPserveraddressin
"NTPserveraddress".
Factory settings: Manual
<NOTE>
•ToacquiretheNTPserveraddressfromtheDHCPserver,
“NetworkSettings”(→page@@)mustbesettoeither“DHCP”,
“Auto(AutoIP)”or“Auto(Advanced)”inthe“Network”tabofthe
networksettingscreen.
NTP server address
When“Manual”isselectedinthe“NTPserveraddresssetting”,input
theIPaddressorhostnameoftheNTPserver.
Maximumnumber
ofcharacters
1to128half-sizecharacters
Charactersthat
canbeentered
Half-sizealphanumericcharacters,half-sizesymbols
Factory settings: blank
<NOTE>
•Toinputthe“NTPserveraddress”hostname,theDNSsettingmust
beselectedontheNetworkscreenoftheNetworksettings.(→page
@@)
NTP port [1 to 65535]
InputtheportNo.oftheNTPserver.
Port Nos. that can be selected 1to65535
Thefollowingportnumbersareusedbytheunitsotheycannotbe
used.
20,21,23,25,42,53,67,68,69,80,110,161,162,443,995,10669,
10670
Factory settings: 123
92
Web screen configurations (continued)
93
 previous next