Panasonic AW-HE130W Home Security System User Manual


  Open as PDF
of 126
 
EMC NOTICE FOR THE PURCHASER/USER OF THE APPARATUS
1. Applicable standards and operating environment
The apparatus is compliant with:
•standardsEN55103-1andEN55103-2,and
•electromagneticenvironmentsE4.
Inaresidential,commercial,lightindustrialandurbanoutdoorsenvironment,thisproductmaycauseradiointerference.
2. Pre-requisite conditions to achieving compliance with the above standards
<1> Peripheral equipment to be connected to the apparatus and special connecting cables
•Thepurchaser/userisurgedtouseonlyequipmentwhichhasbeenrecommendedbyusasperipheralequipmenttobeconnectedtothe
apparatus.
•Thepurchaser/userisurgedtouseonlytheconnectingcablesdescribedbelow.
<2> For the connecting cables, use shielded cables which suit the intended purpose of the apparatus.
•Videosignalconnectingcables
Usedoubleshieldedcoaxialcables,whicharedesignedfor75-ohmtypehigh-frequencyapplications,forSDI(SerialDigitalInterface).
Coaxialcables,whicharedesignedfor75-ohmtypehigh-frequencyapplications,arerecommendedforanalogvideosignals.
•Audiosignalconnectingcables
IfyourapparatussupportsAES/EBUserialdigitalaudiosignals,usecablesdesignedforAES/EBU.
Useshieldedcables,whichprovidequalityperformanceforhigh-frequencytransmissionapplications,foranalogaudiosignals.
•Otherconnectingcables(IEEE1394,USB)
Usedoubleshieldedcables,whichprovidequalityperformanceforhigh-frequencyapplications,asconnectingcables.
•WhenconnectingtotheDVIsignalterminal,useacablewithaferritecore.
•Ifyourapparatusissuppliedwithferritecore(s),theymustbeattachedoncable(s)followinginstructionsinthismanual.
3. Performance level
Theperformanceleveloftheapparatusisequivalenttoorbetterthantheperformancelevelrequiredbythesestandards.
However,theapparatusmaybeadverselyaffectedbyinterferenceifitisbeingusedinanEMCenvironment,suchasanareawherestrong
electromagneticfieldsaregenerated(bythepresenceofsignaltransmissiontowers,cellularphones,etc.).Inordertominimizetheadverse
effectsoftheinterferenceontheapparatusincaseslikethis,itisrecommendedthatthefollowingstepsbetakenwiththeapparatusbeing
affectedandwithitsoperatingenvironment:
1.Placetheapparatusatadistancefromthesourceoftheinterference.
2.Changethedirectionoftheapparatus.
3.Changetheconnectionmethodusedfortheapparatus.
4.Connecttheapparatustoanotherpoweroutletwherethepowerisnotsharedbyanyotherappliances.
4 5
Read this first! (For AW HE130WE, AW HE130KE) (continued)
 previous next