Panasonic AW-HE130W Home Security System User Manual


  Open as PDF
of 126
 
Operations on the AW-RP120 Remote Camera Controller
For operating the camera menus.
CAMERAOSD:
 Whenthisispressedfor2
seconds,theselectedcamera
menuisdisplayed,overlapping
thecameraoutputimage.When
itispressedfor2secondswhile
acameramenuisdisplayed,the
menuisexited.
F1:Turntomovethecursorupand
downinthecameramenuorto
changesettingvalues.Pressto
movetothenextlevelofamenu
itemortochangeasettingvalue
atthelowestlevel.
Selects a camera to be operated.
Camera menu operation
1. Press the appropriate <CAMERA SELECT/GROUP
SELECT> button (<1> to <10>) to select the unit you want
to operate.
2. Press and hold the <CAMERA OSD> button on the AW-
RP120 for about 2 seconds.
TheAW-HE130cameramenuappearsonthemonitor.
3. Turn the <F1> dial to select an AW-HE130 camera menu
item or to change a setting value.
Turnthe<F1>dialtomovethecursorupanddownortochange
settingvalues.
Pressthe<F1>dialtomovetothenextlevelofamenuitemorto
changeasettingvalueatthelowestlevel.
4. To exit the camera menu, press and hold the <CAMERA
OSD> for about 2 seconds.
Switching between day and night mode
1. Press the <MENU> button on the AW-RP120.
The<MENU>buttonlights.
2. Press the FUNCTION menu <29> button.
Thebuttonlights,andthe[OPTION]menuappearsontheLCDpanel.
3. Turn the <F1> dial to select [FUNCTION], then press the
<F1> dial.
4. Turn the <F1> dial to select [OPTION].
[Off]or[On]appearsonthebottomright(F2area)oftheLCDpanel.
5. Turn the <F2> dial to select [Off] or [On], then press the
<F2> dial.
Off:Daymode
On:Nightmode
Color temperature setting (COLOR TEMP)
1. Press the <EXIT> button and the <ATW> button of
<WHITE BALANCE> simultaneously.
The<A>,<B>,<ATW>buttonsof<WHITEBAL>light,andcolor
temperaturesettingmodeisenabled.
ThecolortemperaturesettingvalueappearsontheLCDscreen
duringthistime.
2. Turn the <F1> dial to change the color temperature.
Pressthe<A>,<B>,and<ATW>buttonsof<WHITEBAL>toreturn
tothemodeoftheselectedbutton.
Themodewillswitchfromthecolortemperaturemodetotheoriginal
modeafteraspecificamountoftimepasses.Toconfigurethecolor
temperaturesettingagain,pressthe<EXIT>buttonandthe<ATW>
buttonof<WHITEBALANCE>simultaneously
Preset speed table setting (PRESET SPEED)
1. Press the <MENU> button on the AW-RP120.
The<MENU>buttonlights.
2. Press the FUNCTION menu <29> button.
Thebuttonlights,andthe[OPTION]menuappearsontheLCDpanel.
3. Turn the <F1> dial to select [PRESET SPEED], then press
the <F1> dial.
[Slow]or[Fast]appearsonthebottomright(F2area)oftheLCD
panel.
4. Turn the <F2> dial to select [Slow] or [Fast], then press
the <F2> dial.
42
Basic operations (continued)
43
 previous next