Panasonic AW-HE130W Home Security System User Manual


  Open as PDF
of 126
 
Adjusttheratiobetweenthethreeprimarycolors(RGB)toreproduce
whiteaccurately.Ifthewhitebalanceisoutofadjustment,notonlywill
whitebereproducedpoorly,butthecolortonesofthescreenasawhole
willalsobedegraded.
• Perform adjustment when using the unit for the first time or when
the unit has not been used for a prolonged period.
• Perform adjustment when the lighting conditions or brightness
changes.
EitherAWB(automaticwhitebalanceadjustment)whichinitiates
automaticadjustmentwhenthe<AWB>buttononthecontrollerhas
beenpressedorATW(automatictrackingwhitebalanceadjustment)
whichconstantlyadjuststhewhitebalancecanbeselectedfor
adjustmentpurposes.
TheresultsoftheAWBadjustmentcanbestoredintwomemories,
AandB,when[AWBA]or[AWBB]hasbeenselectedforthewhite
balance.
•Oncethewhitebalancevalueshavebeenadjusted,theirsetup
procedurewillbecompletedsimplybyselectingthemusingthe
cameramenusorwebsettings,orbypressingthebuttonsonthe
controller,providedthattheyaregoingtobeusedunderthesame
conditionsastheonesestablishedwhenthevalueswereset.Thereis
noneedtosetitagain.
•Onceanewsettingisentered,theprevioussettingwillbeerased.
Usethetwomemoriestostoresettingscorrespondingtodifferent
shootingconditions.
Automatic adjustment (AWB: AWB A or AWB B)
When performing operations from a wireless
remote control
1. Shoot a white subject (such as a white wall or
handkerchief) so that it fills the screen.
•Donotshootshinyorverybrightobjects.
• Steps 2 through 8 represent the procedure for selecting the [AWB
A] or [AWB B] memory. They need not be taken if a selection has
already been made.
2. Select [Scene1], [Scene2], [Scene3] or [Scene4] as the
shooting mode by following the procedure in “Selecting
the shooting modes (scene files)” (→ page 27).
Camera
Scene Scene1
Brightness
Picture
Matrix
Return
3. Press the <4> or <5> button to bring the cursor to
[Picture].
4. Press the <M> button.
The[Picture1/3]sub-menuisdisplayed.
Picture 1/3
Chroma Level 0%
White Balance Mode AWB A
Color Temperature 3200K
R Gain 0
B Gain 0
Pedestal 16
R Pedestal 0
B Pedestal 0
Return
5. Press the <4> or <5> button to bring the cursor to [White
Balance Mode].
6. Press the <M> button.
[WhiteBalanceMode]startsblinking.
7. Press the <4> or <5> button to change the White
Balance Mode to be used to [AWB A] or [AWB B], and
press the <M> button to enter the selection.
8. Press and hold the <MENU> button for about 2 seconds.
Thecameramenudisplayisexited.
White balance adjustment
32
33
 previous next