Panasonic AW-HE130W Home Security System User Manual


 
Setting/releasing the limiters
Setting/releasing the limiters
1. Press the [MENU] button.
Tapthebutton(ratherthanpressingit).Whenitispressedfor2
seconds,thecameramenuwillappear.
Ifthishappens,pressthe[MENU]buttonagainfor2secondstoclear
thecameramenu.
Thenstartagainfromstep
1.
2. Press the [4], [5], [b] or [a] button for 2 seconds while
holding down the [PRESET] button.
Thelimiterfortheupperlimit,lowerlimit,leftlimitorrightlimitisset
(orreleased)usingthesedirectionbuttons,respectively.Thetally
lampwillblinkatthistime.Whenalimiterisset,itblinksonce;whena
limiterisreleased,itblinkstwice.
Ifanyotherbuttonwasoperatedbetweensteps
1and2,startagain
fromstep
1.
Setting the limiters
Thelimiterpositionscanbesetbyfollowingthestepsbelow.
Whenthepositionisset,thetallylampblinksonce.
1. Press one of the <CAM1> to <CAM4> button to select the
unit.
•Setting the upper limit position of the movement range
Pressthe[4]or[5]buttonofthewirelessremotecontroltoturn
theunitasfarasthepositionwhichwillserveastheupperlimit.
Next,performthestepsin“Basiclimiteroperations”.
(Pressthe[MENU]buttonquicklyandthenpressthe[4]button
for2secondswhileholdingdownthe[PRESET]button.)
•Setting the lower limit position of the movement range
Pressthe[4]or[5]buttonofthewirelessremotecontroltoturn
theunitasfarasthepositionwhichwillserveasthelowerlimit.
Next,performthestepsin“Basiclimiteroperations”.
(Pressthe[MENU]buttonquicklyandthenpressthe[5]button
for2secondswhileholdingdownthe[PRESET]button.)
•Setting the left-most limit position of the movement range
Pressthe[b]or[a]buttonofthewirelessremotecontroltoturn
theunitasfarasthepositionwhichwillserveastheleft-most
limit.
Next,performthestepsin“Basiclimiteroperations”.
(Pressthe[MENU]buttonquicklyandthenpressthe[b]button
for2secondswhileholdingdownthe[PRESET]button.)
•Setting the right-most limit position of the movement range
Pressthe[b]or[a]buttonofthewirelessremotecontroltoturn
theunitasfarasthepositionwhichwillserveastheright-most
limit.
Next,performthestepsin“Basiclimiteroperations”.
(Pressthe[MENU]buttonquicklyandthenpressthe[a]button
for2secondswhileholdingdownthe[PRESET]button.)
Releasing the limiters
Thelimiterpositionsthataresetcanbereleasedbyfollowingthesteps
below.
Whenthepositionisreleased,thetallylampblinkstwice.
1. Press one of the <CAM1> to <CAM4> button to select the
unit.
2. Release the limiters by taking the steps below.
•Releasing the upper limit position of the movement range
Performthestepsin“Basiclimiteroperations”.
(Pressthe[MENU]buttonquicklyandthenpressthe[4]button
for2secondswhileholdingdownthe[PRESET]button.)
•Releasing the lower limit position of the movement range
Performthestepsin“Basiclimiteroperations”.
(Pressthe[MENU]buttonquicklyandthenpressthe[5]button
for2secondswhileholdingdownthe[PRESET]button.)
•Releasing the left-most limit position of the movement range
Performthestepsin“Basiclimiteroperations”.
(Pressthe[MENU]buttonquicklyandthenpressthe[b]button
for2secondswhileholdingdownthe[PRESET]button.)
•Releasing the right-most limit position of the movement range
Performthestepsin“Basiclimiteroperations”.
(Pressthe[MENU]buttonquicklyandthenpressthe[a]button
for2secondswhileholdingdownthe[PRESET]button.)
Resetting the limiters
Toresetthelimiters,thecurrentlyestablishedsettingsmustbereleased.
Thelimiterpositionsthataresetcanberesetbyfollowingthesteps
below.
1. Release the settings of the limiter positions to be reset
by following the steps in “Releasing the limiters”.
2. Set the limiter positions by following the steps in
“Setting the limiters”.
110
111