Filter
Top Products
[ VII Control ]
- 157 -
HWE09080 GB
-17- Operation Mode <PQHY>
(1) Indoor unit operation mode
The operation mode can be selected from the following 5 modes using the remote controller.
(2) Heat source unit operation mode
When the heat source unit is performing a cooling operation, the operation mode of the connected indoor units that are not in
the cooling mode (Stopped, Fan, Thermo-OFF) cannot be changed to heating from the remote controller. If this attempt is
mode, "Heating" will flash on the remote controller. The opposite is true when the heat source unit is performing a heating
operation. (The first selection has the priority.)
1 Cooling mode
2 Heating mode
3 Dry mode
4Fan mode
5 Stopped mode
1 Cooling mode All indoor units in operation are in cooling mode.
2 Heating mode All indoor units in operation are in heating mode.
3 Stopped mode All indoor units are in fan mode or stopping mode.