Filter
Top Products
Setup
Leica GS20 Field Guide-1.1.0en
83
WoRCS Belt
1. WoRCS Power Supply Module
2. WoRCS RTB Module
3. WoRCS BLUETOOTH Module
4. WoRCS Belt with Belt keepers
5. WoRCS Power Supply Jacked
6. WoRCS RTB Module Jacked
7. WoRCS BLUETOOTH Module Jacked
8. Power Supply to BLUETOOTH Module Cable
9.8.5.1 Powering on the WoRCS
1. The Bluetooth Module is the only belt item with
configurable controls. By Default, Power should be set to
On, and Line should be set to Bluetooth.
2. Follow the procedure listed previously for charging the
batteries. Once the batteries are fully charged, you can
place them in any of the three bays of the battery insert
shown below. The battery insert is both hot swappable and
self-switching. The batteries will be drawn down from bay
one to bay three without interruption in power.
9.8.5.2 Checking the Bluetooth Link
If your Bluetooth link is successfully connected, you will see
the bluetooth icon appear with a chain below and a status
message “Bluetooth Link Restored” will appear at the bottom
of the screen. You can now proceed to Checking the real-time
Link; if not follow the steps listed below: