Filter
Top Products
Data Collection
Leica GS20 Field Guide-1.1.0en
29
Facts About Attributes:
1. The Z attribute is reserved and cannot be changed.
2. The Z attribute contains elevation data
3. Maximum 256 characters per Choice List
4. Attribute names must begin with a letter
5. Limit the attribute names to 10 characters
2.3.3.4 Step 4: Display Attributes: Attaching Map Symbology
The display properties are used to display each feature in the
GIS DataPRO after data collection.
From the Code pull down, choose “Set Display Attributes.
The Codelist may now be saved with map symbology intact.
Figure 2-7: Map Symbology
2.3.3.5 Step 5: Transferring Codelist to the Sensor
1. Open Sensor Transfer
2. Add Sensor
3. Browse to location where codelists are stored (default
location: C:\GDP_Data\Codelists)
4. Right click on codelist and select Send Files...
5. In the Send Files... dialog select the codes you would like
transferred
6. Select the appropriate COM port and select Codelist from
the File Type Choice
With your codelist now on the sensor, you are ready to attach
it to your job and collect GIS Data.
Figure 2-8: Transferring Codelists