Filter
Top Products
Setup
Leica GS20 Field Guide-1.1.0en
63
9. Setup
The Setup application contains both default and user defined
configurations that determine how a unit operates. Three
default configurations are preloaded on the Leica
Geosystems GS20 to allow the user to begin data collection
immediately. New configurations can be created and default
configurations can be modified, but any modifications to a
default must be saved under a different name.
9.1 Selecting, Modifying and Creating
Configurations
The Setup screen opens to a setup menu that displays the
Config Sets, Hardware Management, ID Template
Management and Device Management.
9.1.1 Selecting
A configuration can be selected by selecting Config Sets and
highlighting the table row and pressing Enter. The selection is
shown by a filled circle or "radio button".
9.1.2 Modifying
If Enter is pressed again on a selected field, Setup will open
the configuration for editing. If a Default Configuration is
modified, the user will have to 1
Save As via the context
menu, or exit dialog on Escaping.
Tip: Changes will not take place until the configuration is
saved.
9.1.3 Creating
To create a new configuration from the table, select Menu and
choose 1
New. A text entry dialog will open requiring a name
to be entered and saved. The configuration will then be
selected and editable.
)
When creating a new configuration, values will be
copied from the previously highlighted configuration.