Filter
Top Products
Setup
Leica GS20 Field Guide-1.1.0en
82
2. If the Real-time values are all zero, there is no
communication to the real-time beacon module. So you
will need to verify the configuration.
3. Escape to the Main Menu and select 8
Setup.
)
Verify the user-defined configuration named
“WRCSBEACON” is selected; if WRCSBEACON exists
and is not selected, highlight and press Enter,
otherwise select the default “Beacon”.
4. Press Enter again on the selected configuration to edit the
setup values.
5. Expand the Interfaces branch, highlight the Real-time
branch and press enter.
6. Make sure the Device is set to RTB, and the port is set
WoRCS 2.
7. Escape and save the values, then escape and save the
configuration.
)
If you are editing a default configuration, you will be
prompted to provide a configuration name.
8. Escape to the main menu, and return to the status/
Interface/Real-time branch to check the status of the real-
time device. You should now see values for the frequency,
bitrate, etc.
9.8.5 Connecting to WoRCS Real-Time Satellite (RTS)
If you purchased the Leica Geosystems GS20 with the
Wireless real-time Correction System, the WoRCS, you are
only steps away from collecting real-time sub-meter data. The
WoRCS comes preconfigured with the Bluetooth linked to
your GS20.