Filter
Top Products
Setup
Leica GS20 Field Guide-1.1.0en
76
When a phase mode has been switched, a message will pop
up to indicate that settings may have been changed to the
configuration. If you are currently in a default configuration,
the system will indicate that the changes must be saved into
a new configuration, and a prompt will appear to name that
configuration.
9.8.2.5 Collecting Static points, including kinematic points
of initialization
In order to assist in the amount of time required to occupy a
point to resolve phase ambiguities, a status indicator has
been included in the phase wizard. The status screen
provides the user with an estimated time needed to occupy a
point based on the number of satellites, the satellite geometry,
and the baseline length to the reference GPS.
In order to provide the correct information, the user must enter
a baseline selection. Both the baseline length and antenna
height of an occupation can be entered from a menu dialog in
the codes screen.