Filter
Top Products
Setup
Leica GS20 Field Guide-1.1.0en
78
3. Most likely, you will want to select a User Defined
configuration or press Menu and create a New
configuration based on your highlighted default.
4. Enter the configuration, and expand the Interface branch.
Focus on the Tracking branch and press enter.
5. Set the source to WAAS. That’s it.
9.8.3.1 Understanding the WAAS Corrections
1. The immediate and most notable change will be the WAAS
Satellite Icon in the real-time window. This indicates the
unit is set for WAAS corrections.
2. When the icon and lightening bolt fill to black, this is an
indication that the WAAS signal is being received.
3. Once the corrections have been calculated, the WAAS
Satellite Icon will become Bold, the status bar will indicate
Reference Data is Available, and the positional Indicator
will become a bulls eye.
4. WAAS corrections are able to extrapolate, or coast for 60
seconds. If the correction is lost, a numeric indicator under
the WAAS Satellite Icon will display how many seconds
since the last correction.
5. WAAS Satellites will can be viewed in the Satellite Status
Screen 9. WAAS Signal Strength is also indicated in the
Status Real-time Screen.